Back to displays & data loggers
Product image of the device family – Grubatec – AD-LMB 6 FE-VARIO – Configurable LED annunciator

Manufacturer image of the device family. The actual version may differ.

Displays & data loggers

AD-LMB 6 FE-VARIO

Bus annunciator with six RGB LEDs for fault and status indication

Housing type FERS485 bus
Input
Not specified
Output
Not specified
Power supply
Wide-range power supply
Housing type
FE
Datasheet

Price and delivery time on request. Personal advice from Grubatec.

Model overview.

The AD-LMB 6 FE-VARIO displays fault and status messages using six multicolour LEDs and is controlled exclusively via the bus. For panel-mounted installations, control can be provided by the remote AD-AB 32 terminal block or an external master.

ManufacturerAdamczewski Elektronische Messtechnik GmbH
ModelAD-LMB 6 FE-VARIO
FunctionBus annunciator with six RGB LEDs for fault and status indication
InputNot specified
OutputNot specified
Power supplyWide-range power supply
Housing typeFE
Input typesLogic inputs
Output typesRelay
Supply typesWide range, DC 20-30V, AC 230V
Interface / protocolsRS485 bus, Modbus-RTU
Display / operationIndicator lights
DesignPanel mounting, plug-in terminals, screw terminals
Device functionsfreely configurable
Further technical data for the device family
These details come from the manufacturer’s shared page for the device family. Where several versions exist, individual values apply only to the variant specified. The data sheet for your particular version is authoritative.

Active inputs

Voltage range5 ... 30 V DC
Input resistance> 45 kOhm

Power supply

AC voltage range50 ... 253 V AC, 50/60Hz
DC voltage range22 ... 253 V DC
Rated AC/DC voltage230 V AC / 24 V
AC/DC power consumption3.2VA / 1.7W

Contact supply voltage

Voltage4.8 ... 5.2 V DC
LoadMax. 1 mA

Housing

Dimensions (w×h×d)72x72x71 mm
Panel cut-out68x68 mm
Front membrane IP ratingIP 54
Terminal IP ratingIP 20
Connection technologyRemovable screw terminals
Terminal conductor cross-section1.0 mm² stranded wire with ferrule / 1.5 mm² solid wire
ConstructionPanel-mount housing
Weight~ 145 g

Ambient conditions

Ambient temperature-10 ... 50 °C
Storage and transport-10 ... 70 °C (avoid condensation)

EMC

Product family standardEN 61326-1
EmissionsEN 55011, CISPR11 class B, group 1

Electrical safety

Product family standardEN 61010-1

RS485 bus

Max. number of nodes32
Max. bus length100 m
Bus termination120 Ohm (at both ends of the bus)
WiringDaisy-chain arrangement (no spur lines)

Pin assignment

TerminalTerminal designation
1Supply voltage
2Supply voltage
3Contact power supply
4Contact power supply
5Lamp-test input
6Ground
7Ground
8Ground
9RS485 A
10RS485 B
11Input 1
12Input 2
13Input 3
14Input 4
15Input 5
16Input 6
17Input 7
18Input 8
19Input 9
20Input 10
21Input 11
22Input 12

Other versions.

Models in the same device family. Differences may include inputs and outputs, power supply or housing type.

Personal. Technical. Solution-focused.

Your measurement task deserves
the right solution.

Unsure about the input signal, output or version? Describe your application to us. Together, we will find the appropriate Adamczewski device.

+41 55 617 00 80
GRUBATEC Mess- und Regeltechnik