DS85P Multi-range differential pressure sensor 0...50 Pa (0.5 mbar) to 0...6000 Pa (60 mbar), for air or non-aggressive gases, analog output: 0...10V
The DS85 is a sensor with a diaphragm measuring mechanism for transmitting measured values of pressure, negative pressure or differential pressure of non-aggressive gases. This three-wire sensor is also available with LCD digital display or limit value switch.
Can be ordered in the following variants:
| Measuring ranges | DS85-P200 | DS85-P1000 | DS85-P6000 |
| MB1 | 0...200 Pa | 0...1000 Pa | 0...6000 Pa |
| MB2 | 0...150 Pa | 0...500 Pa | 0...4000 Pa |
| MB3 | 0...100 Pa | 0...300 Pa | 0...3000 Pa |
| MB4 | 0...50 Pa | 0...200 Pa | 0...2000 Pa |
The DS85 is a sensor with a diaphragm measuring mechanism that is used to transmit measured values for pressure, negative pressure or non-aggressive gas differential pressure. The sensor has three wires and is also available with an LCD digital display or a limit value switch.
Operating mode:
| Measuring mode |
| Measuring material: |
| Air or non-aggressive gases |
| Transducer: |
| Electromechanical diaphragm measuring unit |
| Measuring unit: |
| Pa |
| Smallest measuring span: |
| 0...50Pa (0,5mbar) |
| Largest measuring span: |
| 0...6.000Pa (60mbar) |
| Measuring ranges: |
| 0...50Pa (0.5mbar), 0...200Pa (2mbar), 0...500Pa (5mbar), 0...1000Pa (10mbar), 0...2000Pa (20mbar), 0...4000Pa (40mbar), 0...6000Pa (60mbar), 0...10000Pa (100mbar) |
| Measuring range selection: |
| Yes, via 2-pole DIP switch |
| Characteristic curve: |
| Linear |
| Ambient temperature: |
| -10...+50°C |
| Storage temperature: |
| -25...+60°C |
Technical data
- electromechanical diaphragm measuring unit
- Measuring ranges: 0...50Pa (0.5mbar) to 0...6000Pa (60mbar)
- Four calibrated measuring ranges selectable via DIP slider
- Analog output: 0...10V
- Compact plastic housing, protection class IP65
- Supply voltage: 15...30Vdc or 24Vac



