Model MH 3111 Hand-held pressure gauge. With interchangeable probe
Compact handheld pressure gauge with interchangeable sensors up to 1,000 bar
MH 3111 Handheld Pressure Gauge with Interchangeable Pressure Sensors
The SIKA MH 3111 is a compact digital handheld pressure gauge designed for mobile testing, service, and measurement tasks. Unlike a pressure gauge with a permanently integrated sensor, the MH 3111 can be used with a variety of external pressure sensors.
This allows a single base unit to be used for a wide range of pressure ranges and different types of pressure measurement. Depending on the sensor used, the range extends from high-resolution mbar measurements to industrial pressure measurements of up to 1,000 bar.
One device for a wide range of print applications
The MH 3111's measurement range is determined by the connected pressure sensor. Therefore, there is no need to replace the entire meter for a different application—simply connect a suitable sensor.
This modular solution is particularly well-suited for service, maintenance, test stations, and applications where different pressure ranges are measured on a regular basis.
Automatic Sensor Detection
The MH 3111 features a 6-pin Mini-DIN sensor connector with a locking mechanism. Compatible sensors are automatically detected, and the device applies the appropriate measurement range setting.
This makes changing the sensor simple and straightforward.
From the mbar range up to 1,000 bar
A wide range of pressure sensors is available for the MH 3111. The sensor lineup ranges from very small relative pressure ranges to high-pressure sensors rated at 1,000 bar.
This means that the same handheld pressure gauge can be used for both sensitive low-pressure measurements and industrial high-pressure applications.
Different Types of Printing
Depending on the sensor used, different types of pressure can be measured:
- Overpressure
- Negative pressure
- Relative pressure
- Absolute pressure
- Differential Pressure
- Air Pressure / Barometer
- Vacuum
Switchable Print Units
Depending on the sensor, different units of measurement may be used. These include, among others:
- mbar
- cash
- Pa
- kPa
- MPa
- mmHg
- PSI
- mH₂O
This allows the device to be flexibly adapted to different applications and international units of measurement.
Precise Digital Pressure Measurement
The base unit is specified with an accuracy of ±0.1% of the full-scale value for hysteresis and linearity. The actual accuracy of the complete measurement system also depends on the pressure sensor used.
The measurement range and resolution are also determined by the sensor connected in each case.
Digital Adjustment
The MH 3111 is digitally adjustable. Offset and pitch can be used to calibrate the measurement system.
This allows you to correct minor discrepancies between the sensor and the display.
Easy-to-read LCD display
The device features a 2 × 4½-digit LCD display with a display range of -19,999 to 19,999 digits.
The compact display provides a clear view of the current reading and the selected unit.
Hold and Auto-Off functions
The Hold function allows you to freeze the current reading on the display. This is helpful, for example, if you need to read or document the measurement after the actual measurement has been taken.
The Auto-Off feature helps conserve battery power.
Compact and lightweight
With dimensions of just 142 × 71 × 26 mm and a weight of approximately 150 g, the MH 3111 is ideal for mobile measurement tasks.
The housing is made of impact-resistant ABS plastic. The front panel is IP65-rated.
Battery-powered for mobile use
Power is supplied by a 9-V block battery as standard. Optionally, the device can also be powered by an AC adapter.
Sensors for Various Media
Compact piezoresistive pressure sensors are available for air and non-corrosive gases.
In addition, stainless steel sensors are available that, depending on the model, are also suitable for corrosive gases and liquids.
Optional with a calibration certificate
For quality-critical applications, a DAkkS calibration certificate or a factory test certificate is available as an option.
Typical Applications
- Mobile Pressure Measurements
- Service and Maintenance
- Machinery and Plant Engineering
- Leak Tests
- Low-pressure measurements in the mbar range
- Industrial pressure measurements up to 1,000 bar
- Laboratory and Testing Tasks
- Pressure Control in Pneumatic and Hydraulic Systems
Benefits of the MH 3111 at a Glance
- A basic unit for a wide range of print areas
- Replaceable Pressure Sensors
- Automatic Sensor Detection
- Measurement ranges from the mbar range up to 1,000 bar
- Different types of pressure depending on the sensor
- Digitally adjustable
- Switchable Print Units
- Hold and Auto-Off functions
- Compact dimensions
- Weighs only about 150 g
- IP65 on the front
Questions and Answers About the MH 3111
What is the MH 3111?
The MH 3111 is a digital handheld measuring device for interchangeable pressure sensors. The measurement range is determined by the connected sensor.
What is the advantage of a replaceable sensor?
A single base unit can be used to measure different pressure ranges. For a new application, simply connect the appropriate sensor.
What is the maximum pressure that can be measured?
Depending on the sensor, measurement ranges of up to 1,000 bar are available.
Can the MH 3111 also measure low pressures?
Yes. The available sensors start as low as the very low mbar range.
Does the device automatically detect the sensor?
Yes. The sensor is automatically detected, and the appropriate measurement range setting is applied.
What types of pressure can be measured?
Depending on the sensor, relative pressure, gauge pressure, low pressure, absolute pressure, and differential pressure, as well as atmospheric pressure and vacuum, are possible.
What printing units are available?
These include mbar, bar, Pa, kPa, MPa, mmHg, PSI, and mH₂O, among others.
Just how accurate is the MH 3111?
The base unit is specified as ±0.1% of the full-scale value. The overall accuracy also depends on the sensor used.
How fast does the MH 3111 measure?
The standard measurement rate is 4 measurements per second.
Does the MH 3111 have a data logger?
The joint technical data sheet does not list a logger function for the MH 3111. This feature is included in the more advanced models, the MH 3151 and MH 3156.
Does the device have a hold function?
Yes. A current measurement can be held on the display.
Does the MH 3111 have an automatic shut-off feature?
Yes. It has an auto-off feature.
How is the device powered?
Powered by a 9-V block battery as standard. An AC adapter is available as an option.
How big is the MH 3111?
The dimensions are 142 × 71 × 26 mm.
How much does the device weigh?
It weighs about 150 g.
Is the device protected against moisture?
The front of the enclosure is IP65-rated.
Are calibration certificates available?
Yes. A DAkkS calibration certificate and a factory test report are available as options.
What is the difference between this and the MH 3151?
The MH 3151 offers additional features such as a data logger, fast measurement modes, and an analog output. The MH 3111 is the simpler and more compact version for general-purpose pressure measurements.
What is the difference between this and the MH 3156?
The MH 3156 has two sensor connections and can measure two pressure values simultaneously, as well as the difference between them. The MH 3111 works with a single sensor.
Technical data
Technical data
| Type | MH 3111 |
| Measuring range | Depending on the sensor, up to 1,000 bar |
| Types of Printing | Gauge pressure, absolute pressure, differential pressure, and air pressure, as well as vacuum, depending on the sensor |
| Accuracy of the Base Unit | ±0.1% of the final reading |
| Sensor connection | 1 × Mini-DIN, 6-pin, with automatic sensor detection |
| Units | mbar, bar, Pa, kPa, MPa, mmHg, PSI, mH₂O |
| Measuring rate | 4 measurements per second |
| Display | 2 × 4½-digit LCD |
| Display range | -19,999…19,999 digits |
| Functions | Hold, Auto-Off, Digital Adjustment |
| Supply | 9-V block battery or optional AC adapter |
| Housing | Impact-resistant ABS plastic |
| Protection class | IP65 on the front |
| Dimensions | 142 × 71 × 26 mm |
| Weight | about 150 g |
| Item Number | EME8GMH3111000 |
Compatible Pressure Sensors
Numerous interchangeable SIKA pressure sensors are available for the MH 3111. The measurement ranges extend from high-resolution low-pressure measurements in the mbar range to industrial high-pressure measurements up to 1,000 bar.
Depending on the application, sensors for air and non-corrosive gases, as well as stainless steel models for more demanding media, are available.
Not sure which sensor is right for you?
We’d be happy to help you choose the right one based on the measurement range, pressure type, medium, and desired accuracy.
