Model MH 3151 Handheld Pressure Gauge with Interchangeable Probe
Universal pressure gauge with interchangeable sensors up to 1,000 bar
MH 3151 Handheld Pressure Gauge for Interchangeable Pressure Sensors
The SIKA MH 3151 is a versatile digital handheld meter for precise pressure measurements with interchangeable sensors. Instead of being limited to a fixed pressure range, the MH 3151 can be combined with various SIKA pressure sensors.
This allows a single handheld measuring device to be used for a wide range of measurement tasks—from high-resolution low-pressure and mbar measurements to industrial pressure measurements up to 1,000 bar.
The connected sensor is automatically detected. The device retrieves the sensor's data and the corresponding measurement range. This makes it easy to switch sensors and reduces the effort required for applications with different pressure ranges.
A handheld pressure gauge for various pressure ranges
The measuring range of the MH 3151 is determined by the connected pressure sensor. This allows the base unit to be used with different sensors for different pressure ranges.
The available sensors range from highly sensitive low-pressure sensors in the mbar range to rugged stainless-steel pressure sensors for industrial measurements up to 1,000 bar.
This is particularly useful for service, maintenance, test stations, and other applications where different pressure ranges need to be measured on a regular basis.
Automatic Sensor Detection
SIKA pressure sensors feature integrated sensor data. Once connected, the MH 3151 automatically detects the sensor and applies the appropriate measurement range setting.
The system thus offers a convenient plug-and-play solution: Connect the sensor, turn on the meter, and take the measurement within the specified measurement range.
Measuring Different Types of Pressure
Depending on the sensor used, the MH 3151 can measure different types of pressure.
- Relative pressure
- Overpressure
- Negative pressure
- Absolute pressure
- Vacuum
- Air Pressure / Barometer
- Differential pressure using a suitable differential pressure sensor
This allows the MH 3151 to be flexibly adapted to a wide variety of measurement tasks.
Wide selection of print units
Depending on the sensor used, various units of pressure can be selected. These include, among others, mbar, bar, Pa, kPa, MPa, mmHg, PSI, and meters of water column.
This simplifies both domestic and international measurement tasks and allows for direct display in the unit specified for the respective application.
Precise Pressure Measurement
The MH 3151 offers high accuracy in the acquisition and processing of sensor signals. The technical data sheet specifies the base unit’s accuracy as ±0.1% of the final value for hysteresis and linearity.
The actual overall accuracy of a measurement also depends on the pressure sensor used and its specifications.
Three measurement modes for different applications
The MH 3151 supports a range of measurement speeds and can therefore be used for both static pressures and rapid pressure changes.
SLOW – Standard Measurement
In standard mode, the device takes four measurements per second. This mode is particularly suitable for static pressures and slowly changing readings.
Typical applications include, for example, leak tests, pressure checks, or continuous measurements with a slow pressure change.
FAST – Fast Pressure Measurement
In FAST mode, internal measurements are taken at a rate of more than 1,000 measurements per second. This allows rapid pressure changes to be detected much more accurately than with a traditional, slow display.
The signal is filtered to reduce short bursts of noise.
Peak Detection – Detecting Rapid Pressure Peaks
The peak detection mode is available for detecting particularly short pressure spikes. In this mode, the device also performs more than 1,000 measurements per second, but the measurement signal is evaluated unfiltered.
This makes this function suitable for analyzing pressure spikes, rapid pressure fluctuations, and dynamic processes.
Integrated data logger
The MH 3151 features a built-in data logger for recording measurement values.
In manual mode, up to 99 data points can be stored. For longer measurement series, the cyclic logger is available, which can store up to 10,000 data points.
The logging interval can be set between one second and 60 minutes. This allows for both rapid measurement sequences and long-term monitoring.
Min, Max, and Peak Value Memory
The device can store minimum and maximum readings. This makes it easy, for example, to read maximum pressure loads or minimum process pressures after a measurement.
In combination with the fast measurement modes, even brief changes in pressure can be analyzed.
Hold Function
The Hold function allows you to freeze the currently displayed measurement value on the screen. This makes it easier to read and document individual measurement points.
Tare and Zero Point Correction
The tare function allows you to set the current reading as a new reference point. Once activated, subsequent readings are displayed relative to this initial value.
In addition, the zero point and slope can be corrected digitally. This allows for the compensation of minor discrepancies between the sensor and the measuring device.
Averaging Fluctuating Pressure Readings
If the measurement signals fluctuate, averaging can be enabled. The MH 3151 then calculates an average display value over a defined period of time.
This feature can be helpful when the process pressure fluctuates slightly and a stable, representative reading is needed.
Built-in alarm function
Upper and lower alarm limits can be defined for pressure monitoring. If the pressure exceeds or falls below a programmed limit, the device can issue a visual and audible warning.
This makes the MH 3151 suitable not only for measurement purposes but also for monitoring defined pressure limits.
Freely scalable analog output
The MH 3151 has an analog output ranging from 0 to 1 V. This output can be freely scaled and adjusted to the required measurement range.
This allows the measurement signal to be transmitted, for example, to external recording or analysis devices.
PC Connection and Data Transfer
The MH 3151 can be connected to an RS-232 or USB interface via an optional galvanically isolated interface converter.
This allows stored and current measurement values to be transferred to a computer for further documentation and analysis.
Air Pressure Measurement with Sea-Level Correction
When used with a suitable absolute pressure sensor, the MH 3151 can be used to measure atmospheric pressure.
The built-in sea-level correction allows the absolute pressure measured at a given location to be converted to the corresponding atmospheric pressure at sea level.
Rugged and compact handheld measuring device
The MH 3151 features an impact-resistant ABS housing with a membrane keypad and a transparent protective cover. The front panel is IP65-rated.
Measuring just 142 × 71 × 26 mm and weighing approximately 150 g, the device is compact and well-suited for mobile measurement tasks.
Battery-powered or AC-powered
Power is supplied by a 9-V block battery as standard. For longer stationary measurements, an optional AC adapter can be used instead.
Optional with a calibration certificate
For quality-related measurement tasks, the MH 3151 can be supplied with an optional DAkkS calibration certificate or a SIKA factory test certificate.
Typical areas of application
- Mobile Pressure Measurements
- Service and Maintenance
- Leak Tests
- Machinery and Plant Engineering
- Pressure Monitoring
- Detection of Rapid Pressure Spikes
- Long-term recording of pressure readings
- Laboratory and Testing Tasks
- Barometric measurements using a suitable sensor
- Industrial Low-Pressure and High-Pressure Measurements
The Key Benefits of the MH 3151
- A basic unit for a wide range of pressure measurement ranges
- Replaceable Pressure Sensors
- Automatic Sensor Detection
- Measurement ranges up to 1,000 bar, depending on the sensor
- Digital Adjustment
- Built-in audible alarm function
- FAST and Peak Detection modes with >1,000 measurements/s
- Logger for up to 10,000 cyclic data records
- Min/Max, Hold, Tare, and Average functions
- Sea-Level Correction
- Freely scalable analog output 0…1 V
- PC connection via an optional interface
- Compact and rugged design
Questions and Answers About the MH 3151 Hand-Held Pressure Gauge
What is the MH 3151?
The MH 3151 is a digital handheld measuring device for interchangeable pressure sensors. The pressure range is determined not by the base unit, but by the sensor connected to it at any given time.
What is the difference between MH 3151 and MH 3156?
The MH 3151 is designed for measurement using a replaceable pressure sensor. The MH 3156, on the other hand, has two sensor connections and can measure two pressure values simultaneously as well as calculate their difference.
What is the maximum pressure the MH 3151 can measure?
Depending on the connected sensor, measurement ranges of up to 1,000 bar are available.
Can the MH 3151 also measure very low pressures?
Yes. The sensor lineup also includes high-resolution sensors for the mbar range.
Does the device automatically detect the sensor?
Yes. Compatible SIKA pressure sensors are automatically detected, and the appropriate measurement range setting is applied.
What types of pressure can be measured?
Depending on the sensor, measurements such as relative pressure, negative pressure, absolute pressure, vacuum, atmospheric pressure, and differential pressure are possible.
Which pressure units can be displayed?
Units available include mbar, bar, Pa, kPa, MPa, mmHg, PSI, and meters of water column, among others.
How fast does the MH 3151 measure?
In standard mode, the device takes four measurements per second. In FAST and Peak Detection modes, it can take more than 1,000 measurements per second.
Can the MH 3151 measure rapid pressure spikes?
Yes. The peak detection mode was specifically designed for rapid pressure changes and brief pressure spikes.
Does the MH 3151 have a data logger?
Yes. The device has a built-in data logger.
How many measurements can be stored?
Up to 99 data records can be saved manually. In cyclic logging mode, up to 10,000 data records are available.
Can the recording interval be adjusted?
Yes. The logger's measurement interval can be set between one second and 60 minutes.
Does the MH 3151 have an alarm function?
Yes. Lower and upper alarm limits can be programmed, and any exceedances can be signaled both visually and audibly.
Can a measurement be recorded?
Yes. The Hold function allows you to freeze the current measurement value on the display.
Does the device have an analog output?
Yes. The MH 3151 has a freely scalable analog output ranging from 0 to 1 V.
Can measurement data be transferred to a PC?
Yes. With an optional galvanically isolated interface converter, data can be transmitted via RS-232 or USB.
How is the MH 3151 powered?
By default, power is supplied by a 9-V battery. Optionally, an AC adapter can be used.
Is the MH 3151 suitable for mobile measurements?
Yes. The device is compact, weighs about 150 g, and is designed as a portable handheld measuring device.
Are calibration certificates available?
Yes. A DAkkS calibration certificate and a SIKA factory test certificate are available as options.
Technical data
Technical data
| Type | MH 3151 |
| Device Type | Digital handheld measuring device with interchangeable pressure sensor |
| Measuring range | Depending on the sensor, up to 1,000 bar |
| Types of Printing | Gauge pressure, negative pressure, differential pressure, and absolute pressure, as well as atmospheric pressure/barometric pressure and vacuum, depending on the sensor |
| Accuracy of the Base Unit | ±0.1% of the final value (hysteresis / linearity) |
| Sensor connection | 1 × 6-pin Mini-DIN jack with locking mechanism and automatic sensor detection |
| Units | mbar, bar, Pa, kPa, MPa, mmHg, PSI, mH₂O |
| Default measurement rate | 4 measurements per second |
| FAST / Peak Detection | ≥1,000 measurements/s |
| Manual Logger | 99 records |
| Cyclic Logger | 10,000 records |
| Logger Measurement Interval | 1 s…60 min |
| Analog output | 0…1 V, freely scalable |
| PC Interface | Via galvanically isolated interface converters to RS232 or USB |
| Display | 2 × 4½-digit LCD |
| Display range | -19,999…19,999 digits |
| Functions | Min./Max., Hold, Tare, Peak Value, Average, Sea-Level Correction, Alarm |
| Supply | 9-V block battery or optional AC adapter |
| Housing | Impact-resistant ABS plastic |
| Protection class | IP65 on the front |
| Dimensions | 142 × 71 × 26 mm |
| Weight | about 150 g |
| Item Number | EME8GMH3151000 |
Wide selection of interchangeable pressure sensors
Numerous SIKA pressure sensors are available for the MH 3151, covering a wide range of measurement ranges and media. The sensor lineup ranges from high-resolution low-pressure measurements in the mbar range to industrial high-pressure measurements up to 1,000 bar.
Depending on the application, sensors for relative and absolute pressure are available, as well as models designed for air, non-corrosive gases, corrosive gases, and liquids.
We would be happy to assist you in selecting the right sensor for your measurement range, pressure type, medium, and desired accuracy.
