GRUBATEC AG Measurement & Control Technology

Humimeter GF2 / Kit for builders, inspectors, and renovation professionals / 0–20% moisture content

Preconfigured sensor package and accessories for Humimeter GF2 / external sensors can be retrofitted at any time / measurement of gypsum, lime mortar, lime plaster, cellulose, fill, insulating materials, cork and various types of wood / non-destructive measurement of screed possible without CM / for connection to the moisture meter Humimeter GF2

Preconfigured sensor package for connection to the Humimeter GF2 basic device: The set of external sensors extends the field of application for master builders, experts and renovators to the following applications: Measurement of relative humidity, absolute humidity, dew point, wood equilibrium humidity, infrared temperature, gypsum, lime mortar, lime plaster, cellulose, fill, insulation materials, cork and various types of wood.

The Humimeter GF2 building moisture meter with this sensor package makes the everyday life of the builder much easier. You can easily and quickly determine the moisture content of screed, insulation materials or masonry without having to carry out time-consuming CM measurements and estimate the drying process. You can also check whether plaster, wood or parquet have reached the desired moisture content. You can also effortlessly determine the room humidity and temperature, the latter even contact-free by means of an infrared sensor.

 Überprüfung der Kalibrierung

Die Kalibrierung des Gerätes soll alle vier Wochen überprüft werden. Verwenden Sie zur Überprüfung die im Lieferumfang enthaltene Prüfplatte.

Voraussetzung: Das Gerät sowie die Prüfplatte müssen eine Temperatur zwischen 20,0 °C und 26,0 °C haben. Die Holzkassette muss auf einem Holztisch liegen. Es darf sich kein Metall unterhalb der Holzkassette befinden.

  1. Schalten Sie das Gerät ein.
  2. Wählen Sie die Kennlinie „Digit“ mithilfe der Pfeiltasten (siehe „4.3 Kennlinie auswählen“) (Bild 88).

3.Halten Sie das Gerät mittig mit einer Hand und drücken es mit einem Anpressdruck von circa 4 kg auf die graue Prüfplatte (Bild 89).

  • Der angezeigte Wassergehalt muss zwischen 17,8 und 19,2 liegen.
  • Liegt der angezeigte Wert außerhalb dieses Bereiches, muss eine Justierung (siehe „11.3 Justierung durchführen“) durchgeführt werden.

 

Application area

The Humimeter GF2 building moisture meter is a versatile building moisture meter that can be adapted to individual needs with numerous sensors.

Variants are available for the following applications:

  • Builder
  • Building experts / authorities
  • Floor layer
  • Property manager
  • Painter
  • Redeveloper
  • Carpentries and interior design

Performance features

Measuring range 0 to 20 % water content
Resolution 0.1 % Water content
Measuring depth 30 mm
Temperature compensation automatic
Measurement result in seconds without sample preparation
Memory function Hold function, manual measured value memory
Car data logger 10,000 values with measurement location description
Dimensions 147 x 75 x 30 mm
Weight 265 g (incl. batteries)
Power supply 4 pcs. Alkaline AA batteries 1.5V
Menu languages German, English, French, Italian, Spanish, Russian, Portuguese, Czech, Polish and International

Your advantages

  • Measurement result in seconds without sample preparation
  • Individual sensor packages exactly for your application
  • Can be retrofitted at any time
  • Wide range of optional accessories

Extensions and accessories

Art.no. Image Extension, accessories
13141 Conductivity electronics

Conductivity electronics

External conductivity electronics for GF2. Pluggable electronics box with 1 meter cable for connection of external conductance probes with BNC socket incl. BNC cable (Art.No. 12881) for further external conductance probes.
12847 Humimeter hand electrode

Humimeter hand electrode

Humimeter hand electrode with 10 pcs. each. Spare tips 16 mm, 10 pcs. Spare tips 23 mm. For connection to the Humimeter GF2 Art. No. 13141 is required! For connection to the Humimeter WLW art.no. 12881 is required.
13011 Plug-in electrode pair

Plug-in electrode pair

Pair of plug-in electrodes for water content determination of hard set building materials. With 10 pcs. Electrode tips 40 or 60 mm length. For connection to the Humimeter GF2 Art. No. 13141 is required!
12514

Humidity and temperature sensor

Humidity and temperature sensor

Humidity and temperature sensor for Humimeter GF2 and RH2 - relative humidity 0 to 100 % RH, calibration 10 to 90 % +/- 2.0 % RH (at 25°C)
12513 IR temperature sensor

IR temperature sensor

Non-contact IR temperature probe for Humimeter
11929 Plastic case

Plastic case

Plastic case for Humimeter BLW, WLW, GF2 and BL2. Dimensions: 44 x 36 x 11 cm
13012 Flat electrode pair

Flat electrode pair

Pair of flat electrodes, 300 mm long. For determining the water content in screed or insulating materials, especially in edge and floating joints. For connection to the Humimeter GF2 Art. No. 13011 and 13141 required!

Request

Request

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
GRUBATEC Mess- und Regeltechnik