GRUBATEC AG Measurement & Control Technology

Humimeter GF2 / Set for Carpenters / 0–20% Moisture

Preconfigured sensor package and accessories for Humimeter GF2 / external sensors can be retrofitted at any time / fixed round measuring plate with different curves for building materials / sensors can be removed from or added to the package as required / WLW hammer for measuring the water content of wood even in deep layers.

Preconfigured sensor package for connection to the Humimeter GF2 basic unit: Professional building moisture meter for measuring the water content of concrete, screed and many other building materials. External sensors extend the range of use for carpenters to the following applications: The WLW Hammer enables measurement of the water content of wood even in deep layers, while the insulated measuring electrodes enable moisture measurement with defined measuring depth.

The Humimeter GF2 Building Moisture Meter in this configuration greatly simplifies the tasks of carpenters and interior finishers. Determine wall moisture as well as moisture in wooden beams and joists and estimate the drying cycle or process. Verify that plaster, wood or parquet have reached the desired moisture content.

 Überprüfung der Kalibrierung

Die Kalibrierung des Gerätes soll alle vier Wochen überprüft werden. Verwenden Sie zur Überprüfung die im Lieferumfang enthaltene Prüfplatte.

Voraussetzung: Das Gerät sowie die Prüfplatte müssen eine Temperatur zwischen 20,0 °C und 26,0 °C haben. Die Holzkassette muss auf einem Holztisch liegen. Es darf sich kein Metall unterhalb der Holzkassette befinden.

  1. Schalten Sie das Gerät ein.
  2. Wählen Sie die Kennlinie „Digit“ mithilfe der Pfeiltasten (siehe „4.3 Kennlinie auswählen“) (Bild 88).

3.Halten Sie das Gerät mittig mit einer Hand und drücken es mit einem Anpressdruck von circa 4 kg auf die graue Prüfplatte (Bild 89).

  • Der angezeigte Wassergehalt muss zwischen 17,8 und 19,2 liegen.
  • Liegt der angezeigte Wert außerhalb dieses Bereiches, muss eine Justierung (siehe „11.3 Justierung durchführen“) durchgeführt werden.

Application area

The Humimeter GF2 building moisture meter is a versatile building moisture meter that can be adapted to individual needs with numerous sensors.

Variants are available for the following applications:

  • Builder
  • Building experts / authorities
  • Floor layer
  • Property manager
  • Painter
  • Redeveloper
  • Carpentries and interior design

Performance features

Measuring range 0 to 20 % water content
Resolution 0.1 % Water content
Measuring depth 30 mm
Temperature compensation automatic
Measurement result in seconds without sample preparation
Memory function Hold function, manual measured value memory
Car data logger 10,000 values with measurement location description
Dimensions 147 x 75 x 30 mm
Weight 265 g (incl. batteries)
Menu languages German, English, French, Italian, Spanish, Russian, Portuguese, Czech, Polish and International

Your advantages

  • Measurement result in seconds without sample preparation
  • Individual sensor packages exactly for your application
  • Can be retrofitted at any time
  • Wide range of optional accessories

Extensions and accessories

Art.no. Image Extension, accessories
13141

Conductivity electronics

Conductivity electronics

External conductivity electronics for GF2. Pluggable electronics box with 1 meter cable for connection of external conductance probes with BNC socket incl. BNC cable (Art.No. 12881) for further external conductance probes.
12514 Humidity and temperature sensor

Humidity and temperature sensor

Humidity and temperature sensor for Humimeter GF2 and RH2 - relative humidity 0 to 100 % RH, calibration 10 to 90 % +/- 2.0 % RH (at 25°C)
11929 Plastic case

Plastic case

Plastic case for Humimeter BLW, WLW, GF2 and BL2. Dimensions: 44 x 36 x 11 cm
12630

Humimeter WLW Hammer

Humimeter WLW Hammer (ram electrode) with BNC cable, without measuring tips. For connection to the Humimeter GF2 Art. No. 13141 is required!
11482 Measuring tips

Measuring tips

Set of 2 insulated measuring tips for measuring electrodes, 60 mm long for ram electrode insulated

Request

Request

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
GRUBATEC Mess- und Regeltechnik