Model ODWT15P Hydraulic Oil Pressure Gauge, up to 20,000 PSI
High-precision pressure standard for calibrations up to 20,000 PSI
ODWT15P Hydraulic Oil Pressure Gauge for High-Precision Calibrations up to 20,000 PSI
The SIKA ODWT15P is a hydraulic oil pressure gauge designed for particularly demanding calibration, testing, and comparison measurements in pressure measurement technology. The ODWT15P model is specifically designed for pressure ranges in PSI and, depending on the piston and weight set used, allows for calibrations ranging from 5 to a maximum of 20,000 PSI.
With an accuracy of 0.015% of the measured value, the ODWT15P is particularly well-suited for applications that require an extremely stable, reproducible, and long-term reliable pressure reference.
Typical applications include calibration laboratories, quality assurance, industrial metrology, service operations, and professional testing and comparison workstations.
Mechanical primary measurement principle for high accuracy
The operating principle of the ODWT15P is based on the balance of forces between a high-precision piston-cylinder system and calibrated masses.
The applied forces generate a defined force on the vertically mounted piston. At the same time, the system pressure built up hydraulically acts from below on the effective area of the piston.
As soon as the downward force of gravity and the counterforce generated by the pressure are in equilibrium, the piston reaches its defined floating position. The pressure generated in this process serves as the reference value for calibrating the connected test specimen.
Accuracy of 0.015% of the measured value
The ODWT15P achieves an accuracy of 0.015% of the measured value. This makes it suitable for high-precision comparative measurements and the calibration of high-quality pressure gauges.
To achieve this level of accuracy, additional physical factors are taken into account in addition to the effective piston area and the calibrated masses.
Adjustment for the local acceleration due to gravity
Since pressure generation is based on the weight of precisely defined masses, local gravitational acceleration also affects the actual reference pressure generated.
The ODWT15P can therefore be adjusted to the local gravitational acceleration at its location. This is particularly important for demanding metrological applications.
Wide pressure range up to 20,000 PSI
With a variety of piston and weight sets, the ODWT15P covers a very wide hydraulic calibration range. The available configurations range from low-pressure ranges starting at 5 PSI to high-pressure applications with a maximum of 20,000 PSI.
This allows the system to be flexibly adapted to a wide variety of pressure gauges and calibration tasks.
Five piston zones for different pressure ranges
The ODWT15P offers five basic piston ranges:
- Set 1: 5…1,000 PSI
- Set 2: 10…2,000 PSI
- Set 3: 20…4,000 PSI
- Set 4: 100…10,000 PSI
- Set 5: 200…20,000 PSI
Within these ranges, various measurement ranges are available, allowing you to select the desired maximum calibration limit to suit your application.
Interchangeable Piston-Cylinder Systems
A distinctive feature of the ODWT15 series is its interchangeable piston-cylinder system. By replacing the piston assembly, the base unit can be used for different pressure ranges.
This allows for an extended calibration range without having to use a completely separate pressure gauge for each pressure range.
Tungsten carbide piston-cylinder system
The pistons and cylinders are made of tungsten carbide. This extremely hard and dimensionally stable material offers excellent properties for high-precision metrological applications.
The very small gap between the piston and the cylinder is in the micrometer range. The low friction also allows for smooth rotation of the piston during the measurement.
Precision weights made of antimagnetic stainless steel
The weight sets for the ODWT15P are made of non-magnetic stainless steel. The weights are marked with a serial number and either the mass or the corresponding pressure value.
The calibrated masses, together with the effective piston area, form the basis for generating the defined reference pressures.
Hydraulic Pressure Generation Using Oil
The ODWT15P operates hydraulically. The specified hydraulic fluid is DWT Miglyol 812N.
System pressure is built up by the integrated screw pump. By turning the pump in a controlled manner, the pressure increases until the piston, with the weight set attached, is moved into the intended floating position.
Calibration with defined pressure levels
The desired test pressure is determined by the selected piston system and the corresponding combination of calibrated weights.
Once equilibrium is reached, the measured value of the connected test specimen is compared with the reference value of the pressure gauge.
By adding or removing weights, additional test points can then be approached one after another.
What devices is the ODWT15P suitable for?
The hydraulic pressure gauge is suitable, for example, for calibrating and testing:
- Pressure Gauges
- Digital Pressure Gauges
- Pressure Sensors
- Pressure Transmitters
- Pressure Transducers
- Test Gauges
- Reference Pressure Gauges
- industrial pressure measurement systems
Ideal for applications with PSI print units
The ODWT15P is particularly appealing to users who want to perform their pressure calibrations directly in PSI.
This makes this version suitable, for example, for measuring instruments, processes, and international applications in which PSI is used as the primary unit of pressure.
Stable setup for reliable measurement results
For high-precision calibrations, the pressure balance must be placed on a stable, level, and vibration-free surface.
The built-in spirit level, together with the leveling feet, allows for precise horizontal alignment of the system.
During the measurement, vibrations, strong air currents, and significant temperature fluctuations should be avoided as much as possible.
Temperature range for precise calibrations
The device is designed to operate within a stable temperature range of 18 to 22 °C. This reduces additional measurement uncertainties caused by thermal expansion of the piston-cylinder system.
High Long-Term Stability and Recalibration
The ODWT15 series was designed for high long-term stability. Nevertheless, the piston-cylinder system and the set of weights should be recalibrated regularly.
SIKA recommends an initial recalibration approximately two years after purchase. Depending on the environment and frequency of use, recalibration intervals of about two to five years are typical thereafter.
Maintenance and Printing Media
The hydraulic system should be kept clean, as dirt and contaminants can cause increased wear.
The Miglyol 812N used should be checked regularly, depending on usage and operating conditions. As a best practice, SIKA recommends changing the oil about once a year.
The Key Benefits of the ODWT15P
- High-Precision Pressure Calibration in PSI
- Pressure ranges from 5 to 20,000 PSI
- Accuracy of 0.015% of the measured value
- Five different piston areas
- Interchangeable Piston-Cylinder Systems
- Adjustment for the local acceleration due to gravity
- Tungsten carbide pistons and cylinders
- Mass sets made of antimagnetic stainless steel
- Hydraulic Pressure Generation Using DWT Oil
- Integrated Screw Pump
- Ideal for professional calibration laboratories
- High long-term stability
Questions and Answers About the ODWT15P Oil Pressure Gauge
What is the ODWT15P?
The ODWT15P is a hydraulic oil pressure gauge designed to generate defined reference pressures in PSI with high precision. It is used for calibration, comparison, and testing applications in pressure measurement technology.
What pressure range does the ODWT15P cover?
Depending on the piston and weight set, pressure ranges from 5 PSI to a maximum of 20,000 PSI can be accommodated.
How accurate is the ODWT15P?
The specified accuracy is 0.015% of the measured value.
What is the difference between the ODWT15P and the ODWT15B?
The ODWT15P is designed for pressure ranges and mass sets in PSI and reaches a maximum of 20,000 PSI. The ODWT15B, on the other hand, is configured for the bar pressure unit and covers pressure ranges up to 1,400 bar.
How does an oil pressure gauge work?
Calibrated weights exert a defined force on a precision-machined piston. The hydraulic system pressure acts on the effective piston area from below. Once the two forces are in equilibrium, the defined reference pressure is reached.
Why does the piston have to float?
The defined floating position of the piston indicates the state of equilibrium between the weight of the masses resting on it and the hydraulic pressure force.
Why is the piston rotated during the measurement?
The rotation ensures smooth operation of the piston-cylinder system and minimizes the effects of friction during measurement.
What are the different piston areas?
The five basic ranges extend from 5…1,000 PSI, 10…2,000 PSI, 20…4,000 PSI, and 100…10,000 PSI up to 200…20,000 PSI.
Can the print range be expanded later?
Yes. The interchangeable piston-cylinder system allows the ODWT15P to be adapted to different pressure ranges.
What material are pistons and cylinders made of?
The pistons and cylinders are made of tungsten carbide.
What material are the calibration weights made of?
The measuring blocks are made of non-magnetic stainless steel.
What type of print media does the ODWT15P use?
Miglyol 812N DWT oil is specified as the hydraulic fluid.
Which devices can be calibrated using the ODWT15P?
Typical test items include pressure gauges, digital pressure gauges, pressure sensors, pressure transmitters, pressure transducers, and other suitable pressure-measuring devices.
Why is local gravitational acceleration taken into account?
The force acting on the piston depends on both the mass and the local acceleration due to gravity. This effect is taken into account for high-precision calibrations.
What is the intended ambient temperature?
The technical operating temperature range is 18 to 22 °C.
How often should the ODWT15P be recalibrated?
An initial recalibration is recommended approximately two years after purchase. Depending on operating conditions and usage, intervals of about two to five years are typical thereafter.
How often should the oil be changed?
Depending on usage and environmental conditions, SIKA recommends, as a best practice, replacing Miglyol 812N approximately once a year.
Are there any additional accessories available?
Additional piston sets, replacement seal sets, and smaller weight sets, among other items, are available for the ODWT15 series.
Technical data
Technical data
| Type | ODWT15P |
| Execution | Hydraulic Oil Pressure Gauge |
| Pressure range | 5…20,000 PSI, depending on the piston and weight set |
| Accuracy | 0.015% of the measured value |
| Print Unit | PSI |
| Print medium | DWT Miglyol 812N Oil |
| Temperature range | 18…22 °C |
| Pressure connection | G⅜, far left |
| Adapter | G⅛, G¼, G⅜, and G½ (internal) |
| Dimensions without weights | approx. 340 × 225 × 220 mm |
| Maximum height with weights | approx. 450 mm |
| Weight basic unit | approx. 12.6 kg without the weight set |
| Mass set | up to 56 kg, depending on the configuration |
| Piston-Cylinder Assembly | Tungsten carbide |
| Mass sets | Non-magnetic stainless steel |
| Parts in contact with liquid | Stainless steel |
| O-rings | NBR |
Piston Sets and Pressure Ranges
| Piston Set | Pressure range |
|---|---|
| Set 1 | 5…1,000 PSI |
| Set 2 | 10…2,000 PSI |
| Set 3 | 20…4,000 PSI |
| Set 4 | 100…10,000 PSI |
| Set 5 | 200…20,000 PSI |

