GRUBATEC AG Measurement & Control Technology

Type P160.T Pneumatic Benchtop Test Pump -0.95...160 bar

Pneumatic test pump for vacuum and pressure up to 160 bar

P160.T Pneumatic Bench Test Pump for Pressure Calibrations up to 160 bar

The SIKA P160.T is a high-performance pneumatic benchtop test pump designed to generate vacuum and overpressure for testing, comparison, and calibration tasks. It uses only air as the pressure medium. This makes the P160.T particularly suitable for applications where contamination of the test specimen with oil or water must be avoided.

The exceptionally wide pneumatic pressure range of -0.95 to 160 bar allows for the testing of a wide variety of pressure gauges, manometers, and pressure sensors. Despite the high maximum pressure, only minimal force is required.

Pneumatic pressure generation up to 160 bar

While pneumatic test pumps are often limited to relatively low pressures, the P160.T can generate pressures of up to 160 bar using air. This allows numerous testing and calibration tasks—for which hydraulic test pumps are often used—to be performed pneumatically.

The main advantage is that the connected test object does not come into contact with hydraulic oil or water during calibration.

Vacuum and Overpressure Using a Benchtop Test Pump

In addition to positive pressure up to 160 bar, the P160.T can also generate negative pressure down to -0.95 bar. This allows a single device to cover a very wide range of pneumatic test conditions.

A built-in pressure switch allows the unit to be set for either overpressure or vacuum operation. According to the operating instructions, the switch may only be activated when the pressure relief valve is open.

Precise adjustment of the desired test pressure

Pressure is initially generated using the large control lever. Once the desired test point has been approximately reached, the pressure can be precisely adjusted to the required value using the built-in fine-tuning valve.

This makes it easy to compare the reference pressure gauge and the test object and to cycle through several defined test points one after another.

Minimal effort required, even at high pressures

The design of the P160.T allows for the pneumatic generation of high pressures with relatively little effort. This makes it easier, in particular, to perform recurring calibrations and tests at a stationary workstation.

Quick change of test specimens

The P160.T features G¼ connections with quick-couplings for both the reference measuring instrument and the test specimen. This allows for quick and convenient switching between different test specimens.

This is particularly advantageous when performing recurring tests on multiple pressure gauges and reduces the time required to switch between test specimens.

Accurate Pressure Calibration Using Air

The P160.T uses only air as its pressure medium. This prevents the connected test specimens from being contaminated with oil or water.

The use of other pressurized fluids is not intended. In particular, hydraulic oil must not be used, as the manufacturer states that this can cause damage to the test pump.

Basic or Solid – two versions

The P160.T is available in different models. The P160.T Basic model includes the actual benchtop test pump. The P160.T Solid model is also available for convenient transport and a more comprehensive test setup.

The Solid model includes a carrying case, an adapter set, and a gasket set. This provides a convenient, all-in-one solution for various test connections.

Typical Applications of the P160.T

  • Calibration of Pressure Gauges
  • Testing and Comparison of Pressure Gauges
  • Calibration of Pressure Sensors
  • Testing of Pneumatic Pressure Measurement Systems
  • Service and Maintenance Work
  • Testing and Calibration Workstations
  • Quality Assurance and Measurement Technology

The Key Benefits of the P160.T at a Glance

  • Pneumatic pressure generation up to 160 bar
  • Vacuum generation down to -0.95 bar
  • Wide pressure range with just one test pump
  • No contamination of the test specimen with oil or water
  • Air is the sole printing medium
  • Minimal effort required, even at high pressures
  • Fine-adjustment valve for precise pressure control
  • Quick test specimen change thanks to quick-coupling
  • Separate connections for the reference pressure gauge and the device under test
  • Suitable for stationary testing and calibration workstations
  • Available in Basic or Solid versions

Questions and Answers About the P160.T Benchtop Test Pump

What pressure range does the P160.T cover?

The P160.T pneumatic bench-top test pump covers a range from -0.95 bar vacuum to 160 bar overpressure.

What type of print media does the P160.T use?

The P160.T operates exclusively with air as the pressure medium.

Is it actually possible to generate a pressure of 160 bar using air?

Yes. A distinctive feature of the P160.T is its ability to generate pneumatic pressure up to 160 bar. This allows the bench-top test pump to achieve a pressure range that is exceptionally high for pneumatic test pumps.

Can the P160.T also generate a vacuum?

Yes. In addition to positive pressure, the P160.T can generate negative pressure of up to -0.95 bar.

Can the P160.T be used for positive pressure and vacuum?

Yes. A built-in pressure switch allows for operation under positive pressure or vacuum. The pressure switch must only be activated when the system is depressurized or when the pressure relief valve is open.

How is the pressure generated?

The pressure is generated manually using the large lever on the bench-top test pump. As soon as the pressure approaches the desired test point, it is precisely adjusted using the fine-tuning valve.

How can the test pressure be set precisely?

The P160.T is equipped with a fine-adjustment valve. This allows the generated pressure to be precisely adjusted to the desired test value.

Does the test specimen come into contact with oil or water?

No. Since air is used as the pressure medium, the test specimen is not contaminated with hydraulic oil or water.

Can hydraulic oil be used with the P160.T?

No. The P160.T is designed exclusively for generating pressure and vacuum using air. The use of other fluids, particularly hydraulic oil, can damage the test pump.

How are the test object and the reference pressure gauge connected?

The connections for the reference pressure gauge and the test specimen are each designed as G¼ connections with quick couplings.

Can different test specimens be changed quickly?

Yes. The quick-coupling connectors allow for quick and easy switching between different test specimens.

What is the difference between the P160.T Basic and the P160.T Solid?

The P160.T Basic is the standard version of the benchtop test pump. The Solid version also comes with a carrying case, an adapter set, and a seal set, making it particularly well-suited as a more comprehensive testing and transport solution.

How big and heavy is the P160.T Basic?

The P160.T Basic measures approximately 470 × 262 × 170 mm and weighs approximately 6 kg.

How big is the Solid model?

The case for the P160.T Solid measures approximately 575 × 470 × 230 mm. The total weight of the Solid model is approximately 10.2 kg.

What devices is the P160.T suitable for?

The bench-top test pump is particularly suitable for testing and comparing pressure gauges, pressure sensors, and other suitable pressure measuring instruments within the permissible pressure range.

Does a reference pressure gauge have to be used separately?

To perform a comparative test, a suitable reference pressure gauge is connected to the designated port. The reading from the reference device can then be compared with the reading from the unit under test.

Technical data

Technical data

Type P160.T
Pressure range -0.95…160 bar
Negative pressure up to -0.95 bar
Overpressure up to 160 bar
Print medium Air
Connection for Reference Pressure Gauge G¼ with quick-coupling
Test Object Connection G¼ with quick-coupling
Print Settings Lever pump with fine-adjustment valve
Basic – Dimensions approx. 470 × 262 × 170 mm
Basic – Weight about 6 kg
Solid – Luggage Dimensions approx. 575 × 470 × 230 mm
Solid – Weight approx. 10.2 kg
Solid – Adapter Set Brass, chrome-plated
Solid – Gasket Set PA Flat Gaskets and O-Rings

Variants

Execution Description Item Number
P160.T Basic Pneumatic Benchtop Test Pump EPPT160EBL0000
P160.T Solid Bench-top test pump, including carrying case, adapter, and gasket set EPPT1600BL0000

Request

Request

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
GRUBATEC Mess- und Regeltechnik