GRUBATEC AG Measurement & Control Technology

Type P1.T Pneumatic Benchtop Test Pump -0.7....1 bar

Precision test pump for low-pressure applications and calibrations in the mbar range

P1.T Pneumatic Benchtop Test Pump for Precise Low-Pressure Calibrations

The SIKA P1.T is a pneumatic benchtop test pump designed for the precise generation and adjustment of low pressures. With a pressure range of -0.7 to +1 bar, it was developed specifically for calibration and testing tasks in the mbar range.

A particular advantage of the P1.T is its highly precise pressure adjustment. According to the manufacturer, pressure settings down to the pascal range are possible. This makes the test pump suitable for measurements and calibrations at the relative zero point.

For applications requiring exceptional precision, SIKA recommends using it in combination with the Type B2 digital pressure gauge.

Vacuum and Overpressure with a Single Test Pump

The P1.T can generate both negative and positive pressure. The available operating range extends from -0.7 bar of negative pressure to +1 bar of positive pressure.

A separate pressure switch between vacuum and positive pressure is not necessary. This makes it easy to work between negative and positive pressure ranges.

Ideal for calibrations in the mbar range

The P1.T is specifically designed for applications that require the precise adjustment of very small pressure changes. This is particularly advantageous when testing and calibrating pressure gauges in the low-pressure range.

The ability to adjust the test pressure in very small increments allows for precise adjustment to the desired measurement point. The integrated fine-adjustment valve then enables the test pressure to be set exactly.

Pneumatic pressure generation without oil or water

The P1.T uses only air as its pressurizing medium. This ensures that the connected test specimen is not contaminated with oil or water.

This is particularly useful for test specimens where liquid penetration must be prevented.

Quick change of test specimens using quick-coupling

Both the connection for the reference measuring instrument and the connection for the device under test are G¼ connections with quick-coupling fittings.

The quick-connect couplings allow for quick and easy switching between different test specimens. This makes recurring testing and calibration tasks particularly easy.

Fine-tuning for precise test prints

The P1.T is equipped with a fine-adjustment valve for precise setting of the desired pressure value. This allows the generated pressure to be adjusted in a controlled manner to the desired test point.

When used in conjunction with a suitable reference pressure gauge, this provides a compact solution for precise pressure testing in the range from -0.7 to +1 bar.

Compact tabletop design

The P1.T is designed as a sturdy benchtop test pump. With dimensions of approximately 305 × 205 × 140 mm and a weight of approximately 3.0 kg, it can be used in a compact setup at a test station.

The "Basic" version has the part number EPPT001EBL0000.

The Key Benefits of the P1.T at a Glance

  • Specifically designed for calibrations in the mbar range
  • Suitable for measurements taken directly at the relative zero point
  • Pressure range from -0.7 to +1 bar
  • Vacuum and Overpressure Using a Test Pump
  • No pressure switching between vacuum and positive pressure is required
  • Pressure settings can be adjusted down to the Pascal range
  • Fine-tuning valve for precise adjustment of the test pressure
  • Air is the sole printing medium
  • No contamination of the test specimen with oil or water
  • ¼-inch connections with quick-couplings
  • Faster and more convenient changeover of test specimens

Questions and Answers About the P1.T Benchtop Test Pump

For which applications is the P1.T suitable?

The P1.T was specifically designed for testing and calibration tasks in the low-pressure range. It is particularly well-suited for calibrations in the mbar range and for applications that require the precise adjustment of very small pressure changes.

What pressure range does the P1.T cover?

The bench-top test pump generates a vacuum of up to -0.7 bar and positive pressure of up to +1 bar.

Can the P1.T generate both a vacuum and positive pressure?

Yes. The same test pump can be used to generate both a vacuum and positive pressure. A separate pressure switch is not required for this.

How precisely can the test pressure be adjusted?

SIKA states that pressure settings are possible up to the pascal range. In addition, the P1.T features a fine-adjustment valve for precisely setting the desired test pressure.

Is the P1.T also suitable for calibrations near the zero point?

Yes. One of the P1.T's specific applications is calibration directly at the relative zero point.

What type of print media does the P1.T use?

Air is used as the pressure medium.

Could the test specimen become contaminated by oil or water?

No. Since the pressure is generated pneumatically using air, the test specimen is not contaminated with oil or water.

How are the reference meter and the device under test connected?

Both the reference connection and the connection for the test specimen are designed as G¼ connections with quick-release couplings.

Can test specimens be changed quickly?

Yes. The quick-coupling connectors allow for quick replacement of the connected test specimens.

Which reference pressure gauge does SIKA recommend?

For particularly precise pressure adjustments, SIKA recommends the Type B2 pressure gauge.

How big is the P1.T?

The dimensions are approximately 305 × 205 × 140 mm.

How much does the bench-top test pump weigh?

It weighs approximately 3.0 kg.

What is the part number for the P1.T Basic?

The P1.T Basic model has the part number EPPT001EBL0000.

Technical data

Technical data

Type P1.T
Pressure range -0.7…+1 bar
Negative pressure -0.7 bar
Overpressure +1 bar
Print medium Air
Connection Reference G¼ with quick-coupling
Test Object Connection G¼ with quick-coupling
Execution Basic
Dimensions approx. 305 × 205 × 140 mm
Weight approx. 3.0 kg
Item Number EPPT001EBL0000

Request

Request

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
GRUBATEC Mess- und Regeltechnik