VA3K01 Programmable Display Electronics
Programmable Display for Flow and Volume Measurement
VA3K01 Programmable Display Electronics
The VA3K01 programmable display electronics unit is used to display and process signals from flow and volume sensors with frequency or pulse outputs.
The measured values are displayed on an easy-to-read 6-digit, 14-segment LED display. The display can be programmed to show either flow rate or volume. Configuration is easily performed using the front buttons or the teach-in function.
Flexible Signal Processing
The VA3K01 features two relay outputs with dry changeover contacts. This allows measured values not only to be displayed, but also to be used for switching and monitoring tasks within a system.
Depending on the model, RS-232 or RS-485 interfaces are also available, for example, for connecting to printers or large displays.
Advantages
- 6-digit red LED display with 14 mm character height
- Suitable for flow and volume sensors with frequency/pulse output
- Programmable display for flow rate or volume
- Programming via front-panel buttons or teach-in
- Two relay outputs
- Optional RS-232 or RS-485
- AC or DC power supply available
- Front-side protection rating: IP65
Technical data
| Display | 6-digit, 14-segment LED display, red, 14 mm character height |
| Programming | Using the front buttons or the teach-in function |
| Signal Input | Frequency signal from a flow or volume sensor |
| Outputs | 2 × relays with changeover contacts |
| Switching voltage | Max. 250 VAC / 150 VDC |
| Switching current | Max. 3 A AC/DC, min. 30 mA DC |
| Switching Capacity | Max. 750 VA / 90 W |
| Operating temperature | -20 °C to +65 °C |
| Storage temperature | -25 °C to +75 °C |
| Housing Material | Polycarbonate UL94 V-2 |
| Protection class | IP65 (front) |
| Protection Class | EN 60730-1 Class II |
| Sensor Power Supply | AC version: 24 V DC (±15%), 80 mA DC version: max. 80 mA, loop-powered |
| Power supply | 100…240 V AC (±10%), max. 11 VA, 50/60 Hz or 10…30 V DC, max. 5.5 W |
