- very large measuring range of the detectable water content
- Material can freely trickle out of the sensor (no jamming, no plugging)
- Reference characteristic available
- Eight free bulk material characteristic curves pre-installed
- Extremely robust and easy to clean with compressed air
SG1 / Bulk solids and powders / 1–50% moisture content
Moisture meter for bulk material and powder / sensor determines dielectric material properties / low influence of bulk density / perfectly applicable in BigBags, buckets, bags, heaps or piles / Lifetime Support
The humimeter SG1 is a professional moisture meter designed for quickly determining the moisture content of bulk materials, powders, and free-flowing materials. With its rugged penetration sensor, measurements can be taken directly within the material—for example , in bags, big bags, or containers.
Fast moisture measurement directly within the material
The penetration sensor is inserted directly into the material being tested. This allows the moisture content to be determined quickly and without time-consuming sample preparation.
The sensor's open design largely prevents material buildup between the measuring plates and ensures that the material density in the measuring area is as uniform as possible. This contributes to good reproducibility of the measurements.
Can be customized to suit the material
Since bulk materials can vary greatly in terms of composition and density, the SG1 uses material-specific characteristic curves.
The device features a reference characteristic curve as well as 8 freely assignable bulk material characteristic curves. These can be tailored to the respective material based on comparative measurements, such as those conducted according to EN/ISO methods. Upon request, specific characteristic curves for certain materials can also be created.
Advantages of the humimeter SG1
- Rapid determination of moisture content directly in the material
- Suitable for bulk materials, powders, and free-flowing materials
- Measurement range up to 1–50% moisture content, depending on the material
- High resolution of 0.1% moisture content
- Automatic temperature compensation
- Memory for up to 10,000 measurement values
- Measurement series can be saved and documented
- Data transfer via USB or Bluetooth, depending on the device's features
- Multilingual menu navigation, including German, French, and English, among others
- 8 freely configurable material characteristics for customer-specific applications
Suitable for various bulk materials
The SG1 is particularly well-suited for applications in which the moisture content of bulk materials must be monitored regularly. Thanks to its adjustable calibration curves, the measuring device can be tailored to different materials and processes.
To ensure reliable measurements, it is crucial to use the correct calibration curve for the specific material. Grubatec will be happy to assist you in selecting or adjusting the appropriate calibration curve.
Technical data
| property | humimeter SG1 |
|---|---|
| Measuring range | 1–50% water content, depending on the material |
| Resolution | 0.1 % Water content |
| Operating temperature | 0 to +40 °C |
| Temperature compensation | Automatic |
| Measured value memory | Up to 10,000 data points |
| Base Unit | 150 × 75 × 30 mm |
| Weight basic unit | 270 g, including batteries |
| Penetration Sensor | 255 × 150 × 70 mm |
| Weight of the penetration sensor | 1,615 g |
Application area
| Food | Building materials | Raw materials | Fillers | Other |
| FlourEmulsifiers
Fillers Kaolin powder Mineral powder Additive Polydextrose
|
SandQuartz sand
Gravel Cement Topsoil Plaster Compensating fill Insulating fill Plaster |
OreCoalDust
Foundry sands Alumina Al2O3 powder Additive Chalk Stone powder Stone granules Casting powder Titanium oxide Lime |
GranulesPigments
Plastics Recycling granules Waste plastics Plastic flakes Recyclates Regranulate Fillers Rock flour Silicates Oxides/Hydroxides Silica Silica gel |
DesiccantDrying agent
Dyes Talc Aggregates Alloy surcharges Polishing granules Medicinal granules Pharmaceutical granules Grains Cork Washing powder Surfactants Octabin |
Performance features
| Measuring range | 1 to 50 % water content (depending on the material) |
|---|---|
| Resolution | 0.1 % Water content |
| Operating temperature | 0 to +40 °C |
| Memory function | Hold function, manual measured value memory for 10,000 values with measuring location description |
| Temperature compensation | automatic |
| Dimensions | 150 x 75 x 30 mm |
| Weight | 270 g (with batteries) |
| Power supply | 4 pcs. Alkaline AA batteries 1.5V |
| Menu languages | German, English, French, Italian, Spanish, Russian, Portuguese, Czech, Polish and International |
Your advantages
Frequently Asked Questions About the humimeter SG1
What materials is the humimeter SG1 suitable for?
The humimeter SG1 is suitable for measuring the moisture content of bulk materials, powders, and free-flowing materials. Typical applications include sand, gravel, granules, powders, and other loose materials.
How does the measurement work?
The penetration sensor is inserted directly into the material to be measured. The device determines the moisture content based on the material's electrical properties and the stored material characteristic curve.
Does each material require its own characteristic curve?
Yes. Different materials have different physical properties. Therefore, selecting the appropriate material calibration curve is crucial for accurate moisture measurement.
The humimeter SG1 features several freely configurable calibration curves that can be individually adjusted to the specific material.
Can the SG1 also be used for sand and gravel?
Yes. The SG1 can be used for sand and gravel, provided the correct characteristic curve is used. Grubatec will be happy to assist you in selecting the appropriate characteristic curve for your application.
Can custom characteristic curves be created?
Yes. If there is no suitable standard characteristic curve available for a specific material, a custom characteristic curve can be created or adjusted based on reference measurements.
How quickly is the measurement taken?
The measurement is performed directly within the material in a short amount of time. In many applications, time-consuming sample preparation is not necessary.
Does the material for the measurement have to be taken from the process?
Not necessarily. The sensor can be inserted directly into bags, containers, big bags, or other suitable collections of material.
Is temperature taken into account during the measurement?
Yes. The humimeter SG1 features automatic temperature compensation to account for the effects of temperature on measurements.
Can the measured values be saved?
Yes. The device can store up to 10,000 measurement values. This allows measurement series to be documented and analyzed later.
Can the measurement data be transferred to a computer?
Depending on the model or accessories, measurement data can be transmitted via USB or Bluetooth and processed further.
How accurate is the Humimeter SG1?
Measurement accuracy depends, among other things, on the material, the calibration curve used, and consistent measurement procedures. In particular, using the correct material calibration curve is essential for reliable results.
What should you pay special attention to when taking measurements?
To ensure reproducible results, the sensor should be completely and as uniformly as possible surrounded by the material. In addition, the appropriate calibration curve for the material being measured should always be selected.
Does Grubatec help with selecting the right characteristic curve?
Yes. Just let us know which material you would like to measure. We’ll help you select the appropriate calibration curve and, if needed, advise you on a custom calibration.
Extensions and accessories
| Art.no. | Image | Extension, accessories |
|---|---|---|
| 12278 |
|
Humimeter USB Data Interface ModuleHumimeter USB data interface module with LogMemorizer measurement data acquisition and evaluation software on USB stick including USB cable for PC
(Attention: retrofitting option only possible in the factory)
|
| 10600 | ![]() |
Factory calibration certificate Material humidityFactory calibration certificate - Calibration delivery record for material moisture meters
|
| 14433 | ![]() |
Thermal printerThermal printer with battery - Mobile serial printer for Humimeter devices with USB interface
|
| 14953 |
ISO test equipment monitoringfor Humimeter SG1
|
|
| 14924 | ![]() |
Humimeter SG1 Insertion SensorInsertion sensor with open shape for free-flowing materials
|
| 12472 |
|
Spare tipReplacement tip (measuring head) for Humimeter BLL, BL2 and RM1
|
| 14433 | ![]() |
Laboratory order Humimeter characteristic curve creationLaboratory order for the creation of a characteristic curve of a new material for an FSA or Humimeter device
|






