Type MRE-MREG Bourdon tube pressure gauge without case filling Industrial version -1...1600 bar Nominal sizes 63,80,100,160,250 mm
Suitable for outdoor use - Closed system / Housing completely stainless steel / Without electrical power supply
SIKA quality pressure gauges in industrial design with 100, 160 or 250 mm stainless steel housing are ideally suited for pressure measurement of gaseous and liquid media, but not for highly viscous or crystallizing media.
There are DIN display ranges from -1...0 bar up to 0...1600 bar (brass connection up to 1000 bar; stainless steel connection up to 1600 bar), and special ranges can be made on request.
The stainless steel housing is available as a bayonet ring housing (type MRE) or as a flared ring housing (type MRE-G).
| Housing design |
| Bayonet ring housing |
| Flared ring housing |
| Connection position |
| Below |
| Back eccentric |
| Center back |
| Nominal size |
| 63 mm |
| 80 mm |
| 100 mm |
| 160 mm |
| 250 mm |
| Display range |
| -1..1,5 bar |
| 0..16 bar |
| 0..60 bar |
| 0..1 bar |
| 0..4 bar |
| 0..10 bar |
| 0..25 bar |
| 0..0.6 bar |
| 0..6 bar |
| -1..3 bar |
| 0..2,5 bar |
| 0..100 bar |
| -1..15 bar |
| -1..0 bar |
| -1..9 bar |
| 0..1.6 bar |
| 0..600 bar |
| 0..400 bar |
| 0..250 bar |
| 0..40 bar |
| 0..1000 bar |
| -1..5 |
| 0..160 bar |
| 0..1600 bar |
| Process connection |
| G1/4 B |
| 1/4 NPT |
| G1/2 B |
| 1/2 NPT |
| M20 x 1.5 |
| Fixing edge |
| Without |
| Behind edge |
| Front edge |
| Clamp mounting |
| Process connection material |
| Brass |
| Stainless steel |
Technical data
