Type VK3 Flow switch for direct installation in copper pipes Plastic version with PVC sheathed cable Ø 22...54 Switching range ON 10.5...58.3 l/min / Switching range OFF 9.2...50.2 l/min

The SIKA flow switches are used for monitoring volume flows. Depending on the requirements, they are available for different nominal sizes and switching point ranges. Thanks to the "modular principle", the product variants and options can be adapted to a wide range of applications. The wide temperature and pressure ranges as well as the choice of materials or the various connection options offer a very high degree of flexibility. This is why SIKA flow switches are used in many areas:

- Heating technology

- Industrial cooling circuits

- Water treatment

- Drinking water applications

The flow switch consists of a paddle system with a permanent magnet at its upper end. A reed contact is placed above this magnet outside the flow.

A second magnet is used to generate a restoring force, for the paddle. When the flow to be monitored hits the paddle system, it is deflected. This causes the magnet to change its position relative to the reed contact, which is thus actuated. As soon as the flow is interrupted, the paddle moves back to its initial position and thus actuates the reed contact again. The restoring force required for this is generated by the two repulsing magnets.

Utilizing the magnetic force, compared to a conventional leaf spring, results in significantly better long-term stability and much higher insensitivity to pressure peaks.

- Direct installation in copper pipes

- Easy assembly:

> Soldering nipple

> Insert O-ring

> Tighten union nut

- Scope of delivery Flow switch, O-ring and solder nipple

- Pad lengths for copper pipe Ø 22...54

- Easy to distinguish by the color of the union nut