GRUBATEC AG Measurement & Control Technology

Type VKX15 Flow switch with pipe section Plastic version with PVC sheathed pipe DN 15 Switching point 2.5 ±0.5 l/min

Cost-optimized design / pipe section with threaded or soldered connection

SIKA flow switches are ideal for monitoring flow rates and are available in various nominal diameters and switching point ranges depending on requirements. Thanks to the “modular design,” product variants and options can be adapted for a wide variety of applications, with the broad temperature and pressure ranges, material selection, and diverse connection options offering a high degree of flexibility. For this reason, SIKA flow switches are used in many fields, including heating technology, industrial cooling circuits, water treatment, and drinking water applications.

The flow switch consists of a paddle system with a permanent magnet at the upper end, above which a reed contact is located outside the flow channel. A second magnet generates the restoring force of the paddle. When the flow hits the paddle system, it is deflected and changes the position of the permanent magnet to the reed contact, which is then actuated. As soon as the flow is interrupted, the paddle returns to its original position and actuates the reed contact again. The required restoring force is generated by the repelling magnets. Compared to conventional leaf springs, utilizing the magnetic force offers better long-term stability and greater insensitivity to pressure peaks.

It should also be noted that this flow switch is particularly suitable for pool applications.

The product is available with various process connections, including pipe sections with G1/2 external thread, G3/4 external thread and 15 mm and 22 mm internal solder ends.

The switching voltage can be either 230 VAC or 48 VDC, depending on requirements and application. Alternatively, versions with a switching voltage of 24 VAC or 42 VDC are also available.

Process connection
Pipe section G1/2 male thread
Pipe section G3/4 external thread
Pipe section 15 mm inner solder end
Pipe section 22 mm inner solder end

 

Switching voltage
230 VAC, 48 VDC
24 VAC, 42 VDC

 

Technical data

 

Request

Request

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
GRUBATEC Mess- und Regeltechnik