Type VTY10 MS Turbine flow sensors with threaded connection Brass version for HVAC and industrial applications 1 ...30l/min DN 10
Drinking water approval / Low wear and extremely long service life due to high-quality bearings / Virtually no series dispersion due to fixed pulse rate / Threaded connection or QuickFasten, proven in numerous large series applications / High measuring accuracy, largely independent of installation position due to integrated flow rectifier
The turbine flow sensors of the VTY series have been specially developed for use in drinking water series applications and are used to measure drinking water tap quantities.
The incoming liquid is divided by the perforated disc into partial jets, which uniformly strike the rotor and cause it to rotate. The rotor speed is now converted into an electrical pulse signal (frequency): The rotor is magnet-equipped and a Hall-effect sensor detects the rotary motion.
A flow proportional frequency signal (square wave signal) is available.
The high-quality bearing enables an exceptional service life with low wear. In addition, the fixed pulse rate ensures virtually no series dispersion. The sensors are insensitive to pressure surges and have a high measuring accuracy, which is largely independent of the mounting position due to integrated flow rectifiers.
The turbine flow sensors of the VTY series have already been successfully tested in numerous large-scale production applications.
The product is available with a nominal diameter of DN 15 and offers various options for electrical connection.
It is possible to use 80 mm single wires with Molex Mini-Fit® Jr. connector or to use 1 m PVC cable.
| Nominal width |
| DN 15 |
| Electrical connection |
| 80 mm single wires with Molex Mini-Fit® Jr. connector |
| 1 m PVC cable |
Technical data
