MESSUMFORMER WT225 - VT225 - WF225 for connection to Pt100, mV transducers or resistance transmitters
For connection to Pt100, mV transducers or resistance transmitters. A voltage signal 0...10 V and a current signal 0/4...20 mA are available simultaneously as output signals. Both output signals are referred to the common negative pole.
For connection to Pt100, mV transducers or resistance transmitters. A voltage signal 0...10 V and a current signal 0/4...20 mA are available simultaneously as output signals. Both output signals are referred to the common negative pole.
| Operating mode: |
| Measuring mode |
| Entrance: |
| Pt100 in three-wire circuit, mV or resistance |
| Span: |
| smallest 20 °C, largest 400 °C at VT 225 smallest 0...10 mV |
| Mess start: |
| -50, -30, 0, +30, +50, +100 °C |
| Characteristic curve: |
| temperature linear, voltage linear |
| Settings: |
| Lower range value and span adjustable from the front via trimmer |
Technical data
Transducer for connection to Pt100, mV transducers or resistance transmitters
Lower range value and measuring span of the transducer adjustable from the front via trimmer
Plastic housing for mounting on 35 mm standard profile rail according to EN 50022
