PERITACT 80 - Differential pressure gauge - Measuring range: 0...6000 Pa for air or non-aggressive gases
Indicator with diaphragm measuring unit for displaying pressure, negative pressure or differential pressure of non-aggressive gases. Indicator supplied with accessories for mounting in front of or behind a control panel or for wall mounting.
Available in the following variants:
0...50 Pa (0.5 mbar), 0...100 Pa (1 mbar), 0...200 Pa (2 mbar), 0...400 Pa (4 mbar), 0...500 Pa (5 mbar), 0...1000 Pa (10 mbar), 0...2000 Pa (20 mbar), 0...4000 Pa (40 mbar), 0...5000 Pa (50 mbar), 0...6000 Pa (60 mbar)
The indicators with diaphragm movement are used to display pressure, negative pressure or differential pressure of non-aggressive gases and are supplied with accessories that allow mounting in front of or behind a control panel or wall mounting.
The following extensions are available as options:
- Combination with an adjustable pressure switch can be connected via common pressure connection pieces.
- Indicator with up to two adjustable red or green limit pointers.
| Operating mode: |
| Measuring mode |
| Measuring material: |
| Air or non-aggressive gases |
| Transducer: |
| Mechanical diaphragm measuring unit |
| Measuring unit: |
| Pa |
| Smallest measuring span: |
| 0...50Pa (1mbar) |
| Largest measuring span: |
| 0...6000Pa (50mbar) |
| Measuring ranges: |
| 0...50 Pa (0.5 mbar), 0...100 Pa (1 mbar), 0...200 Pa (2 mbar), 0...400 Pa (4 mbar), 0...500 Pa (5 mbar), 0...1000 Pa (10 mbar), 0...2000 Pa (20 mbar), 0...4000 Pa (40 mbar), 0...5000 Pa (50 mbar), 0...6000 Pa (60 mbar) |
| Measuring range selection: |
| Preset ex works |
| Set point adjustment: |
| 2 setpoint pointers adjustable over the full scale range, 1 output relay per limit value with potential-free changeover contact |
| Contact load: |
| 250 Vac, 6A, non-inductive load |
| Ambient temperature: |
| -10...+50°C |
| Storage temperature: |
| -25...+60°C |
Technical data
- Diaphragm measuring unit
- Smallest measuring range 0...50 Pa
- Analog outputs 0...10 V, 0...20 mA or 4...20 mA
- Large analog display with limit value pointers
- Supply voltage 230 Vac, 24 Vac or 24 Vdc
- Switching function min. or max.
- Two-wire version MZP 80
- Wall mounted housing IP 65
